Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32

Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32
Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32 Carbon Fibre Exhaust Tip M2 M3 M4 M5 M6 F20 F30 F32
Product Code: CF-TIP-M
Price: £86.95

Available Options


* Car Model:

Qty:     - OR -   Add to Wish List
Add to Compare

Excellent quality easy bolt on exhaust tip made from real carbon fibre, 304 grade stainless steel with perforated inner walls (perforated inner walls not available for cars with MPerformance Exhausts).

  • Price is for 1 x Tip so for M cars you'd need to add 4 into the basket.
  • Genuine carbon fibre, inner pipe is made from high quality 304 stainless steel.
  • Easy slide on (original tips need to be removed) bolt-on, complete with clamps and bolts
  • Front Tip diameter: approx 92mm (including carbon trim)
  • Diameters (back inlet pipe, front tip, and shaft length): 70mm-92mm-115mm for M models, and 60mm-92mm-130mm for F2X M135i M140i M235i M240i and F3X 335i/340i/435i/440imodels, and 67mm-92mm-130mm for cars fitted with M Performance Exhaust (please double check your original pipe diameter after removing the existing tip).
  • Perforated inner walls are not available for cars fitted with M Performance Exhaust
  • FREE 'M' Engraving
  • Note on fitting to M135i 140i 235i 240i: Although there is no need to cut the original tips to fit however you will not see the perforated inner walls once fitted. If you want to expost the perforated inner walls the original pipe must be trimmed to your desired length and you can decide how far in or out you want the perforated inner wall to be visible. This is only applies to the M135i 140i 235i 240i models.
  • Note on fitting to F3X 335i/340i/435i/440i: If you are running original exhaust you should choose 60mm--92mm-130mm size, on these cars after removing the original tip the guide pin on the original pipe needs to be removed but this is an easy two min job. The tip can then be slided on and fitted with the clamp supplied. Removal of guide pins is not required on other models.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
SSDD MotorSport Ltd © 2018
View Mobile / Standard